Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

11.06.2025 00:45

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

It also is a device that limits the change in current flow.

In schematic diagrams this is the symbol for a fuse:

But it can get overloaded, and no longer works.

How many couples swap wives?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

He then describes Rainy Season and Lightning.

Barnstars:

What made you recently say to yourself, “Wait. Really?”

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

The third is lightning and “how it gets conducted into a home.”

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Why would the state lie about the Earth's shape? We know that it's flat, but why do they lie and tell us that it is a sphere?

A fuse is a non-resetable over current circuit protector.

a photo is worth a thousand words.

but this device (an Inductor) … impedes the rapid changes in the current.

What advice would you give to a father of a teenage daughter on how to protect her from boys, dating, and social media? How should fathers discuss these topics with their daughters?

Edit 2024–10.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Why are American women so ugly nowadays?

This is where this question deviates from being a 'generic' question, and becomes more specific.

One

Because the load is inductive, the current lags the voltage.(by a bit).

Apple issues urgent warning to all 1.8 billion iPhone users - ladbible.com

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

He then describes the function of a fuse.

Why do I smell bad even though I have good hygiene?

There are three different concepts here that are getting confused.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Can they start feeding only one meal to prisoners on death row or those doing a life sentence? Because only then will it be real punishment. If they want extra food they can work or pay from their own pocket.

There are two important concepts here.

What is lightning?

2024–10–10[John johnson John Johnson ]

What caused the Democratic Party's 2024 presidential campaign to implode so horrifically?

It seems Mohan does not understand the difference between a comment and an Answer.

These are simplified answers to the original question, and does not change anything I wrote above.

At one ohm, the resistor has a maximum of 1 watt power.

Why Mets are positioned to fare better than Yankees in latest Dodgers series - New York Post

what exactly is a ‘surge’ protector?

but I think this circuit , shows a few more pieces.

Here is a simplified AC power diagram.

Chinese EV Makers Pull Away From Tesla With Sales Gains - Barron's

2024–10–16 [ OO OLAOYE OYEBODE ]

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Marvell Stock Slides. Why It Could Be the Cheap AI Chip Play. - Barron's

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Eagles star Saquon Barkley stunningly hints he could retire ‘out of nowhere’ - New York Post

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

The other is “what does a “fuse” do?”

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

I post the exact comment here.

Upvotes:

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

For this case there are devices called Metal oxide varistors (MOV).

(Dc diagram shown, AC is similar).

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

One is “what exactly is in a ‘surge protector’ ? ”

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

First Sentence:

2024–10–14 [Omar Gharbi Omar Gharbi ]

The bolt then partially travels down the line to your home.

At least they know the answer if they wanted it.

This is 'the assistant's answer'

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

An AC voltage/ current source, and an ac inductive load.

What does a fuse do?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

This device then solves the entire problem.

eight

[old diagram got deleted by accident]

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

so, what happens?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

A circuit breaker is similar, but is resettable.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

nine

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

So, the voltage could go up to 500 volts, and the fuse will not open up.

[image of Common-mode choke]

the problem then depends on "how fast does the fuse operate?".

These devices are installed between the “hot” and “neutral” and protective ground.

This is where the MOV conducts again, and dissipated the energy.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

This one hit behind the barn.

He then asserts :

But… the neutral is now “floating” because of the 1 ohm resistance.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Now when you have a certain ac resistance, then a current flows in a loop.